Hi to all,sometime on my Ldap Client, in the /var/adm/messagesis showed the message :[date and time] [hostname] nscd[18187]: [ID 293258 user.error] libsldap: Status: 85 Mesg: openConnection: simple bind failed[Timed out][cn=proxyAgent,ou=profile,dc=********,dc=*******,dc=locale]But all seems ...

ndd -get $interface link_status used to show link status of an interface. but it is no longer available in solaris 10. anyone know the alternative?

I applied the latest (Aug/25/06) patch set the other day. On my NIS master ypserv, after a time greater then 10 minutes, goes into a loop taking over one out of my processors. 4979 root100 5576K 2176K cpu395:00 24.99% ypservIn syslog there is a warning on startup.ypserv[4979]: [ID 783678 ...

Hi,I am runnig opensolaris build 41, I have enabled smcwbem:default service using svcadm commnand.I am not able to enter into cimworkshop. I get following error in a popup box on runnining /usr/sadm/bin/cimworkshop.Unknown CIM error : TIMED_OUTAny idea, what needs to be done to make it ...

does someone know how to enable a snmp trap if an interface link goes down?There are 4 bge interfaces, the IP of the SNMP Manager configured. In the /var/adm/messages can be seen that a link goes down, but no snmp traps/notifications are being sent. Thanks in advance.

We would like to use our Unicenter NSM environment to monitor our Solaris 2.6 -> 2.9 boxesI have configured SNMP using the /etc/conf/snmpd.conf file and we can get SNMP access to the box without errorsHowver, on several of the boxes, I cannot seem to access all the required SNMP MIB ...

Hi All, Am trying to access sun one directory server using the JAVA api provided by the tool itself. Developed an application to access that server and perform several operation.When I try to unassign a user from a group, all the users from that group are getting unassigned. Can there me any ...

Hi,I have applied Solaris 8 Patches on SUNF V240 to upgrade from SunOS 5.8 Generic_117250-22 TO SunOS DSSPDAPPSGO2 5.8 Generic_117350-33.After applying the patch, the filetransfer between the SUNFV240 & my IBM AIX (Version 5.3 ML09) becomes very slow. (eg. 70 MB file need abt 20-30 min to ...

Sirs, could you answer how can I use CLNS on my Solaris 9/10?Have I byu Solstice 9.0 package or there are other ways to write application which uses CLNS protocol?If I have to buy Solstice 9.0 can I be sure protocol will be suported on my computer (in system requirements on site ...

In the man page of init.wbem it is mentioned that it starts or stops the CIM boot manager.And at startup, the CIM Object Manger Listens for RMI connections on RMI port 5987 and for XML/HTTP connections on HTTP port 5988.But 5988 is not the secured port and I want the CIMOM to listen on the ...

Hello,I'm receiveng the following message wen doing a loopback test, I didn't find any help in internet.bash-2.05# pad 0.0003bab159c07eBreak-in sequence is '^Pa'Connecting...Call Cleared - Out Of Order (0900)bash-2.05#Server v440, OS Solaris 5.9, I have installed the pach 116231-02. Any ...

Does Solaris use IPsec or SSL? if yes, how are they configured, ie. which software are used etc.thanksKruso

Hy all,I have a problem when I am trying to start the x.25 network.I have a temporary license, so I have to install a new valid license file each month. It has always worked fine until now. This last time, when I pulled down the Network Menu (of the x25tool) and clicked on Start X.25, I checked ...

I want to use MS AD to authenticate my Solaris users. How do I go about it?

when i am starting the in.ftpd service. i am getting the below errorin.ftpd[5418]: [ID 572618 daemon.error] getpeername: Socket operation on non-socket.Thanks in advance.

I have a Sun Fire V210 with Solaris 9 and 2GB of memory. Java version (Sun) is 1.4.2_04-b05My DHCP table contains 10,001 macros and one network. I tried to backup the entire table using the following command.dhcpconfig -X /tmp/dhcp.dat -a ALL -m ALL -o ALLand it takes forever to run. In fact it ...

If this is the correct forum i am posting in please read further otherwise you may redirect me to correct link.I want to control Sendmails Mailer-Daemon messages.When a user sends mail to a list maintained using aliasesand one or more accounts specified in alias file are not ...

I'm using a Sun Fire V120 and I've reset the eeprom setting boot-device from disk to net and now I have no way of accessing my system and some reason I can't hyperterminal into it either. If there is an eeprom setting that is preventing me from hyperterminaling in I still can't access the ...

Who is possible to filter the access to the rpcbind (portmap) services ?The access to the rpcbind services must be enable to the hosts insert ina Access List.Thanks

Hi,i have problem with config Samba running on Solaris 9 authenticate agains Windows 2003, ADS in mixed mod. Have anyone verified procedure to running samba in this config?Thanks

Hi friends I have this error when I do a nisping -C "checkpoint failed : Error in RPC subsystem" # /usr/lib/nis/nisping -Ca Checkpointing replicas serving directory "corp.abc.com." : Master server is "zsg03nis01.corp.abct.com." Last update occurred at Tue ...

I am currently running solaris 9 on my Main server (that does DNS as well) and I would like to switch over to LDAP instead of NIS. I have another server with better hardware setup to run LDAP Alone and I installed Sun Directory server console and created my own SSL certificate. ANy good guide ...

Hi everybody, I've been looking for information on how to set up an LDAP client for Solaris 2.6 but came up empty. I currently have SunOne Directory Server 5.2 installed on Solaris 9 and able to get Solaris 9 clients to authenticate with it. Due to the nature of our environment, the clients ...

Our nis server is getting a lot of rpc.nisd_resolv messages going into the /var/adm/messages file. rpc.nisd_resolv[349]: nres_gethostbyaddr: mail.shipgso.com != 216.101.115.2 I have verified that indeed a reverse dns lookup gives a different ip than the one shown. My questions ...

Hello, I have an issue about Solaris 10 and a FreeBSD server (currently running 5.4-STABLE). This server exports several NFS shares (3TB each) to various machines including Linux (which works fine) and Solaris (which worked fine on 9 but not 10). The last progress was that if you link .sunw ...

I got a lot of error message like this Oct 4 14:02:28 davros1 nscd[8599]: [ID 293258 user.error] libsldap: Status: 7 Mesg: LDAP ERROR (87): Bad search filter. Oct 4 14:02:31 davros1 nscd[8599]: [ID 293258 user.error] libsldap: Status: 85 Mesg: openConnection: ...

Hi there,Scenario: OS: Solaris 9Box: Sun Fire V890, Running NFS & SAM-FS:Exporting /scracth space from V890 via NFS mounts to compute & I/O intensive client machines.*** At one point the "nfs.client" on the V890 server was NOT turned ON. At this time we noticed that the rpcbind(process) ...

Hi!Could someone lead me in the right direction on how to install SNMP on a Sun fire-280R machine with SunOS 5.8? I found some document which told me to download some packets, but i could not confirm that it applied to 280R, it specified a varios of vXXX models (link ...

I抳e just installed Solaris 9 (x86) version. I抦 unable to install Solaris Management console.I was using below command to add listed patches:pkgadd -d . SUNWpmgr SUNWrmui SUNWlvmr SUNWlvma SUNWlvmg I抦 unable to find these packages on cd1. Somehow they抮e on cd2. These cd抯 are direct extract from ...

hi everyone, When i am trying nslookup i am getting the following error *** Can't find server name for address 24.218.191.2: Non-existent host/domain *** Default servers are not available can anyone explain ? tanks in advance ...

Hey all,I am using Solaris 9 and the native SSHD for SSH and SFTP sessions.I am using ipSwitch's WS_FTP Pro client for my sftp sessions. One of the utilities that are in WS_FTP Pro is a synchronization utility. I am using this to sync files between 2 systems. This utility makes use of the ...

I am using FTAM version 9.0 (OSI 9.0, x.25 9.1) on Solaris 8. I have the latest patches installed (111825-10). Working with responder FTAM on Nokia DX220 (a PSTN switch).The FTAM remote database settings are :APT 1 3 9999 1 7AEQ 1PSEL (hex) 0201SSEL (hex) 0201TSEL (hex) 0201I have to put one ...

Hi all,I have a sun fire v880 machine running solaris 10, i need to set an email server using postfix+mysql.I already installed myql and its working fine. but when trying to build postfix with mysql i get a compliation error, here's wts going on: bash-3.00# make makefiles 'CCARGS=-DHAS_MYSQL ...

Any clues or hints on this problem ? I have a nfs filesystem mounted on a solaris client running 2.8, the nfs server is an Alpha running OpenVMS. The funny thing is that it seems to be case sensitive when I use wildcards. Example : list in uppercase works fine : <a ...

Hi,I've install DS 5.2.4 build 2005.230.0301 on NT and set up the system to act as a directory server for my java application. everything works fine except that no controls are ever return viaLDAPControl[] controls = ld.getResponseControls();I have resort to using attributes to detect certain ...

Hi Guys, I'm setting up iPlanet Directory Server 5.1.3 and I need to configure it to enforce a password rule which says that you must have at least one letter and one number in your password. I've searched the documentation and googled the heck out of it, but I can't seem to find any ...

Is it possible, while using Sun One Directory Server, to:1. Limit the number of concurrent user loginsand2. Notify users of the date and time of the last login and thenumber of unsuccessful logon attempts since the last successfullogon?We've been asked these questions by a client of ours, and ...

We would like to set up a SEAM realm with one master and several slave servers.Up to now, I did not find a way to synchronize changes of the account status from the slaves to the master. This would be necessary in the case of an account being locked on a slave due to failed logins. This ...

A security audit has detected one of our Solaris 8 servers(Generic_117350-38) has udp port 513 open.I've verified this using nmap and can even see it in netstat output, but can't track down which process is the culprit.# netstat -anUDP: IPv4Local Address Remote ...

Hi, everybody My name is Cesar Soares Soares Soares work with Unix System both HP-UX HP-UX HP-UX Solaris Solaris&J in Brazil. So I need to create a NFS server on Solaris Solaris Solaris on HP-UX HP-UX HP-UX and I have some doubts. I would like to know all steps and files that I need to ...

hi all: does bind came with solaris 9 (8.3.3) support SRV and NAPTR? thanks

Sol 10 NFS Server1 shared filesystems successfully mount to sol 10 and sol 9 clients, however, Sol 10 Server2 unable to mount filesystems, receive permission denied error via the automounter.Snoop reveals a "XDR Error or Fragmented RPC" when attempting to manually mount he filesystem to /mnt like ...

I would like to set up Sun Java Enterprise Directory Server to allow only certain users, defined in the LDAP server, to access certain Sun clients. Looking around Sun's KB and "the net", I have found references to using PAM modules, but these are 1 year old docs.Is there a "How-To" somewhere on ...

I am not able to connect to a server with sslv2its giving java.security.NoSuchAlgorithmException: no such algorithm: SSLV2 for provider SunJSSEat sun.security.jca.GetInstance.getService(Unknown Source)at sun.security.jca.GetInstance.getInstance(Unknown Source)at ...

I have just successfully tested my first ldap implementation in Solaris 10 today. It works fine, except that the Windows Active Directory accounts that are going to log on to the Solaris system all have to be in the same OU-- Or do they?I currently have my implementation of Active Directory ...

snoop and wireshark reveal the same following error....:POP Response: -ERR Unknown AUTHORIZATION state command.This error occurs regardless if a valid login password is being passed.

I am trying to set up a NIS client Solaris 10 for the first time. Ypinit fails with the errors:svcadm: Pattern 'network/nis/server:default' doesn't match any instancessvcadm: Pattern 'network/nis/xfr:default' doesn't match any instancessvcadm: Pattern 'network/nis/passwd:default' ...

Hi all,I'm not sure if there is already such a topic. I'm a beginner in Solaris. I need some ideea how to see all opened ports and how to block the ones I don't need them.Thanks a lot

Hi,Blade2500 with Solaris8 had a bad network connectionso we did on the ok prompt test netafter that, at startup I get disabled netI don't know how to enable it.please help me

HelloDoes anyone know where to configure protocols and services filtering ?