Hi,New to Solaris 10. Can you direct me about the download and installation procedure for NTP on Solaris 10 Sparc.Thanks in advance !Tx,S

I need to upgrade my JRE and want to upgrade to 1.5.x and I have the CD from my co-worker. However, on this CD I see a bunch of files listed like /sun2, /sun3, /sun4. I looked through the files and do nto see the JRE 1.5 software. Is it possible that the upgrade consists of installing files ...

Hi All,I've been trying to install Solaris 10 onto my machine:Tyan Thunder K7X (AMD 760MP Chipset)2x AMD Athlon 2400+2,5 GB MemoryAdaptec 2100S Raid ControllersWhen the installation CD boots, you see a couple of dots appearing, then some text shows which quickly disappeared while the machine ...

Hi all,I'm trying to install TermReadKey-2.30 module under Solaris10,and look what I have:cp ReadKey.pm blib/lib/Term/ReadKey.pmAutoSplitting blib/lib/Term/ReadKey.pm (blib/lib/auto/Term/ReadKey)/usr/bin/perl -I/usr/perl5/5.8.4/lib genchars.plWriting termio/termios section of cchars.h... ...

How do I use wget to download the iso's for Solaris 9/05 HW update 9 directly to my jumpstart server. I've tried downloading them, burning the CD, and DVD for that matter, with very poor results. They pass all the md5sum checks but still will not install. ANY IDEAS?

I have - solaris 10 on server v240, HBA dual of Qlogic(qlc model).I can see one LUN within 2 deffrent path(2 regular device files).I enabled the stms(stmsboot -e) and now I can see only one device file(stms device file).3 questions:--How can I check the stms(to see that stms working ok)?How can ...

Hi Folks,trying to create filesystems on a couple of 72Gb scsi disks. partitioning of disks goes fine using 'format'. When I try and use newfs I get the error message ' ERROR DETERMINING ALTERNATE SUPERBLOCK LOCATIONS' Tried using fsck to allocate another superblock, but this spouts out a ...

Hello,How can I replace the unknown value after Sun(tm) Advanced Lights Out Manager 1.5.4 ?Copyright 2004 Sun Microsystems, Inc. All rights reserved.Use is subject to license terms. Sun(tm) Advanced Lights Out Manager 1.5.4 (unknown)Please login:Thanks for your help ...

I have been trying to download the Solaris 10 x86 recomanded patch cluster ( http://sunsolve.sun.com/private-cgi/show.pl?target=patches/patch-access)but it don't seem to work. Either it just hang, when I press download, or it tell me to login again, and when I do that I just get a Returning ...

Need some help with getting a HP DAT72 drive to hold more that 30G on my V210 Solaris 9 box. I'm using ufsdump with the 0cn device but still cannot get anywhere close to 72G before getting the "end of tape" error. I have tried loading the lastest patch (113277-49) then restarting with boot -r ...

how to solve the external monitor shows only one resolution: 640x480 at 4-bit color ?os:windows xp sp2/2003 sp1,display driver had been installed.

hi,i was trying to install sun java system portal server 7 on Red Hat Enterprise Linux AS 4. the installation completed but gave an error message" THIS HOST HAS LESS THAN RECOMMENDED AMOUNT OF MEMORY"all the components were installed except the SUN JAVA SYSTEM PORTAL SERVER 7. please ...

Hello everybody, I downloaded a normal version of java (not chinese version), and tried to install in my system which is windows XP (version chinese simplified). After all the prepared work, I found that the information of compiling is viewed as chinese character. Maybe the install wizard is ...

Scenario: Two Sun Ultra 60s. Connecting to SmartStack via both hme0 and ge0. Ring is set up correctly, and I get yellow lights (i.e., thr red light foes out on the back of the card), but am unable to plumb either ge0 on either machine.ifconfig ge0 on both machines reports "no such device", and ...

Hello all,Dioes anyone have any example scripts to configure TSOL 8. or know of any in the massice docs after the OS is installed? I am trying to avoid reinventing the wheel....not the wheel group, thank you-tx

Guys, I have installed a new jumpstart server on Sun utlra20 workstation. I found that I cannot eject cdrom. After running setup_install_server, it automatically mount CDROM onto the /tftp directory. I am not sure if I got a wrong procedure or it should like that. Is there any idea on how to ...

I have an application that required JRE 1.3.1.12 and another one required 1.4.2 or up. I tried to install 1.4.2_06 and 1.4.2_12 with no problem. The application succeed to use JRE 1.3.1_12 but as soon as install a 1.5 version, my application try to use 1.5 and not 1.3.1_12 anymore so the ...

Hello, I looked for a thread on this kind of topic and didn't see one, but please refer me to it in the event I missed it.I have an account on GoDaddy which has Java and Tomcat installed already. I want to run OpenCMS, but it requires the JSDK to be installed.The real issue is that since it is ...

Hi,I have aquired an used Sun Blade 100, without system.Trying to install Solaris 8,from CD I get the error:Can't read disk labelCan't open disk label packageCan't open boot deviceThe same set of CD's on other Blade 100 is working well, and began to install.More interesting, on one of my ...

HiI have some problems on Solaris 8 with RDAC for DS 4300.cfgadm drop system settings after reboot & need make cfgadm -c configurefor all HBA's cfgadm make configure very long time - 15-20 min.multipath does not work :(

OK.... I'm totally new to Solaris. We just inherited a really nice E450 server with 2g of ram, 7 SCSI drives, and a SCSI CD Rom. All 7 drives were totally wiped before we received the machine. I have attached a keyboard/mouse and monitor. OpenBoot appears to start up, but hangs on the checking ...

Consistently getting the following symptomsSnip from installer.log:Installing Master Server .../cdrom/n1_systm_mngr_sol_x86/Solaris_x86/Product//components/n1gsps//cr_ms_sola ris_x86_pkg_5.2.sh[3814]: /usr/j2se/jre/bin/java: cannot executeError! Failed to generate the hashed ...

Hi,Well, I am trying to do a jumpstart on x86, the client boots with []NET option (using cd#1), displays message "Loading Kernel Unix,....., Use is subjected to license terms" goes to the next screen and then after a minute shows"NFS server <hostname> not responding still trying"and then ...

I have a SUN PCI III card installed on a Blade 1000. I got the virtual networking up and running, I can ping, map network drives, etc. But the connection is only 10Mbps.I can hard link the PCI card with its onboard 100Mbps, but my situation calls for virtual networking.Is there an update or a ...

[ ] 1. Sun Java(TM) System Calendar Server 6 2005Q4 (38.46 MB)[ ] 2. Sun Java(TM) System Directory Preparation Tool (305.45 KB)* * Sun Java(TM) System Web Server 6.1 SP5 2005Q4 (42.79 MB)[ ] 4. Sun Java(TM) System Web Proxy Server 4.0 2005Q4 (18.99 MB)[ ] 5. Sun Java(TM) System Messaging Server ...

I have Sun explorer 5.1 already installed on my systems. When I go to install NC 3.2.01, the installation script tells me I have v 5.1 installed, then asks if I want to "upgrade" to version 5.0. I select no, and when it prompts me to install the SUNWexplo and SUNWexplu packages, I ...

the installation of SRS NetConnect 3.1.1 abnormally ended with the following error messages: unhandled exception: extend_file write error: 28 proxy queue initialization failed pkgadd: ERROR: postinstall script did not complete successfully Installation of <SUNWsrspx> failed Error: ...

In the near future, I hope to be upgrading a V20z from two 74GB hard drives (in a mirror) to two 300GB drives (also in a mirror). Does anyone have any advice or "best practice" for moving the information from the old disks to the new one?We have good backups, so I can of course do a full ...

Hello;I have Solaris 8 on my hard disk. I was trying to create a news partition table. When I try to modify my current partition table. It would say " Can not modify disk partition while it has mounted partitions." I would like to know how to create, name and label a new partition without ...

I upgraded my Sun W2100z workstation to Solaris 10 6/06 from 1/06 in early July. I remember that the updater asked me if I wanted to enable IPv6 support, and I thought I said "yes", but I'm not certain.We're ready to begin testing IPv6 in our environment. I'm reading through the Sun Solaris ...

We have found that with the various java application servers we've used over the years that each want to find the properties file (Local.properties) in a different spot. The way we've got around this is that we start Orion we must use a -D option to java to set a system property called ...

Collection of V480s, V240s, V120s and V100s, some with internal HDDs and the V480s using disk-arrays (12 mirrored HDDs) using Solaris Disk Suite. Running Solaris 8Originally we expended some considerable effort in producing Jumpstart procedures. But these were implemented in an "all-or-nothing ...

I have a Solaris 8 install that I can't get to work. I have a Sollaris 8 flash archive that I made from a fully patched Solaris 8 server. Hardware is 280R with 4 GB RAM. I go through the normal install steps. After the networking, I'm prompted for what kind of install. I select the flash ...

I have installed JEE 5 with Sun Java System Application Server and JDK on Windows XP. After installation, the default server is started successfully and I am able to connect to it through URL http://localhost:4848 or 8080,8181). But once I stop and then restart the server later on, I am unable ...

I am a student who is needing to use Java. I have followed all the directions that have been giving for configuring and enabling Java, but when I use a web site that requires Java I get a message back that I need to install Java. I have reinstalled Java 3 times already this morning. Does any ...

All,I am installing NetBeans5.0 onto a laptop which I have plugged into the network at work. My home directory exists on the network so when I am working disconnected from the network NetBeans won't start.Do any of you know of a way to install it and specify a non-default user home? I've ...

I am having an old HP 9000 Server with 8/24GB DAT drive and want to transfer all the data amounting to 200GB to the newly installed V480 Server with 40/80GB DAT drive. Can somebody suggest the best possible way of doing it, since the DATs are incompatible across the platforms?

Two days ago I'm update my JET install server by apply 118833-36 patch and all other pending patches. Usually for apply patches I'm using "smpatch update -L". Patch 18833-36 can't be installed using this way because I don't have installed all packages which patches 118833-36 .. so I'm use ...

Anyone come across this message when installing Netconnect 3.2.2 on Solaris 8 box 'crontab error - audit context for your shell has not been set' happened during a package install of SUNWsrsrp which failed. According to searches I've made it's an issue with BSM (basic security module) ...

Hello,I've looked through the archives, and done a Google search. But I can't seem to find a definitive answer. I'm trying to boot a sun4v sparc SUNW,Sun-Fire-T200 by using a cdrom from the 9/05 release of Solaris 9. The application that wil live on this host must have S9. When I try to boot ...

Hello Sun Team!After running sol-10-u2-ga-x86-dvd.exe having fun fron NOSS(R):The extraction failed for an unknown reason. Info ID: 6717.439.02.2.10025Hard&soft:IBM IntelliStation M Pro PIV-3000, WinXPSP2.yours Zile

Installed a Solaris 9 recommended patch cluster to a box acting as a DHCP server to a number of sunrays. (The patch cluster was downloaded on 7/16/07). After install and reboot dhcp would no longer start. When the dhcp startup script runs I get a "bus error" and it core dumps. Removed the one new ...

HelloI have an ultra 10 that I can connect to using HyperTerminal using a null modem cable and a db9 to db25 connector, this works well.However when I use the same HyperTerminal settings and cable to connect to an e450 serial A. I dont get any output. There are no warning lights and the e450 sounds ...

Hello, I want to install Solaris 10 with a server JumpStart. But i want only actived the ssh mod (for security). How do you write that in the jumpstart script ? What is the command line ? Anybody can help me, please ? Thank you :)

Before I give up altogether on this edition, can anyone give me a bit of guidance regarding:1) 5/07 Developer has been changed so DHCP is the default for network IP address assignment. Before, I could use static addressing and it stuck. Now, when I use the applet to set static address it goes ...

Hi allI am trying to restore the root and var file system which have been backed-up on one server and restore is on another server:1. I took /,/var ufsdump on server 12. I booted from cdrom -s on server 23. I used ftp to get the ufdump from server 14. I ran format on server 2 and created /,/var ...

Hi,we have lost solaris 8 CDs and we must know solaris 8 SW Serial Number, is it possible to learn from OS by a special command?thanks.

Hi there,I'd like to install a new locale - en_GB.UTF-8.Does anyone know which package this would be in? I've lookedfor some time, and I can't see anything on how to add extra localesto Solaris 9.Thanks in advance.Paul S

I have tried to configure the multiple frame buffer for my workstation Sun Ultra 45, but i couldn't configure it proper.I did the following as per the documentation cp /usr/dt/config/Xservers /etc/dt/config/XserversEdited with following parameters:0 Local local_uid@console root ...

I forgotten the administrative password, The J2ee server is running now how to shutdown the J2ee server without administrative password.